Each use 1500-2000 hours of maintenance should perform the project: 1. Testing
and adjustment of oil discharge quantity and pressure detection function of
lubricating grease. 2. Air system filters, oilers, pressure regulating valve and
other functions and water, impurities of the test, inspection and necessary
adjustments. 3. Air pressure switch set value check and pressure detection
function test and adjustment. 4. Check and adjust the setting value check and
measured value of mold high indication switch. 5. Modulus of high gear
adjustment device sprocket, chain, drive shaft, worm, worm and other parts
without loosening, abnormal and chain tension check and adjustment.
6. Gear box
top cover removal, internal parts wear and key loosening status of the
inspection, and oil chamber cleaning, lubricating oil and operating conditions,
noise, vibration testing and inspection. 7. Transmission system of various parts
of the fuel injection point of the spit out of oil and pressure testing and
adjustment. 8. The brake mechanism, the brake angle, the brake gap and to make
the film wear test, check and the necessary adjustments. 9. Slide the guide rail
and guide gap measurement and friction surface inspection, if necessary, make
adjustments, correction. 10. Flywheel bearings and other manual lubrication to
add grease and piping punch
quotes xo, joints and other checks.
11. Balancing cylinder operating
conditions and its oil lubrication system, such as oil, joints, testing,
inspection. 12. Motor circuit and electrical operating circuit insulation
resistance of the test and inspection. 13. Machine accuracy (vertical, parallel
funny punch quotes, integrated gap, etc.)
test, if necessary, adjust the correction. 14. The appearance and accessories of
the precision presses are to be inspected, cleaned and inspected, and the
mechanical feet (base) are tightened and tightened. 15. Lubrication to the oil
system of the pump, piping, distribution valve punch
quest game, such as cleaning and maintenance inspection. 16. Air system of
pneumatic components, piping and other cleaning and maintenance and action test
check.
没有评论:
发表评论